Zurich ZR11, Owner'S Manual, Page: 24 / 96

Using the Code Reader
THE SYSTEM MENU
22 ZR11
„ Freeze Frame Data (if available) will display after DTC #1.
If more than one malfunction is present that causes more than
one DTC to be set, only the code with the highest priority will
contain Freeze Frame data. The code designated “
01 ” on the
Code Reader display is referred to as the PRIORITY code,
and Freeze Frame data always refers to this code. The priority
code is also the one that has commanded the MIL on.
Retrieved information can be uploaded to a Personal
Computer (PC) with the use of optional software (see
instructions included with the software for more information).
14. When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the Code Reader returns to the “Priority” Code.
15. Determine engine system(s) condition by viewing the Code
Reader’s display for any retrieved Diagnostic Trouble Codes, code
definitions and Freeze Frame data, interpreting the green, yellow
and red LEDs.
„ If DTC’s were retrieved and you are going to perform the repairs
yourself, proceed by consulting the Vehicle’s Service Repair
Manual for testing instructions, testing procedures, and flow
charts related to retrieved code(s).
„ To prolong battery life, the Code Reader automatically shuts
“Off” approximately three minutes after it is disconnected from
the vehicle. The DTCs retrieved, Monitor Status and Freeze
Frame data (if any) will remain in the Code Reader’s memory,
and may be viewed at any time by turning the unit “On”. If the
Code Reader’s batteries are removed, or if the Code Reader is
re-linked to a vehicle to retrieve codes/data, any prior
codes/data in its memory are automatically cleared.
THE SYSTEM MENU
The System Menu provides the ability to retrieve “enhanced” DTCs and
Anti-Lock Brake System (ABS) DTCs for most BMW, Chrysler/Jeep,
Ford/Mazda, GM/Isuzu, Honda/Acura, Hyundai, Mercedes Benz, Nissan,
Toyota/Lexus, Volkswagen and Volvo vehicles. The types of enhanced
data available depends on the vehicle make. You can also access an
“Oil Maintenance Light” reset function, and return to the Global OBD2
mode.
Depending on the vehicle under test, some features and functions
may not be available.
„
To access the System Menu, press the
SYSTEM MENU button. Use the
UP and DOWN
buttons, as
necessary, to highlight the desired
option, then press the
ENTER
button to view the selected information.