Using the Code Reader
CODE RETRIEVAL PROCEDURE
19
Use the
UP
and
DOWN
buttons, as necessary, to highlight
the desired vehicle engine size,
then press the
ENTER
button to
continue. If necessary, select
Next
to view additional options.
-
The Select Transmission screen
displays.
Use the
UP
and
DOWN
buttons, as necessary, to highlight
the desired transmission type, then
press the
ENTER
button to
continue. If necessary, select
ENTER
to view additional
options. The Vehicle Information
screen displays.
If the information shown is correct for the vehicle under test, use
the
UP
and
DOWN
buttons, as necessary, to highlight
Yes
, then press the
ENTER
button. Proceed to step
10
.
If the information shown is not correct for the vehicle under text,
or if you wish to reselect the vehicle, use
UP
and
DOWN
buttons, as necessary, to highlight
No
, then press the
ENTER
button to return to the Select Year screen.
10.
After approximately 10~60 seconds, the Code Reader will
retrieve
and
display
any Diagnostic Trouble Codes, Monitor Status and
Freeze Frame Data retrieved from the vehicle’s computer memory.
The Code Reader will display a
code only if codes are present in the
vehicle’s computer memory. If no
codes are present, the message
“No Powertrain DTCs or Freeze
Frame Data presently stored in the
vehicle’s computer.”
The Code Reader is capable of
retrieving and storing up to 32
codes in memory, for immediate or later viewing.
11.
To read the display:
Refer to DISPLAY FUNCTIONS on page 6 for a description of
display elements.