Configuring the LM-CIRIA control unit
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
40
Note
•
Settings are only saved if
SAVE
is selected.
55 Configuring the touchring
The behaviour of the touchring can be adapted to suit individual requirements. You can configure how
the touchring behaves when an absence scene is enabled and it is touched, which building service
type is controlled by the touchring and whether operation is audibly confirmed with an action click.
551 Configuring touchring behaviour when switched on
Path: SERVICE MENU / INTERNAL / CONFIGURATION / WAKE-UP REACTION
Figure 71:
WAKE-UP REACTION
settings level
–
Start point:
WAKE-UP REACTION
settings level
1. Select
TOUCHRING
.
=
TOUCHRING
illuminates.
2. Run your finger along the touchring until the desired setting appears.
3. Select
SCENE
.
=
SCENE
illuminates.
4. Run your finger along the touchring until the desired number appears.
5. Select
KEY
.
=
KEY
illuminates.
6. Run your finger along the touchring until the desired setting appears.
5. Select
SAVE
to save the settings.
=
Touchring behaviour when switched on is saved.
=
The previous selection level appears.
TOUCHRING parameter
Description
NO REACTION
The touchring does not function if an absence scene is enabled.
DIMMING
Lighting can be dimmed using the touchring if an absence
scene is enabled, but no scene can be recalled.
DIMMING & SCENE
Lighting can be dimmed and a scene can be recalled using the
touchring if an absence scene is enabled. The SCENE param-
eter defines which scene can be recalled.
Table 3:
TOUCHRING
setting options
Summary of Contents for LUXMATE CIRIA
Page 1: ...LUXMATE CIRIA Instructions for start up and use ...
Page 2: ......
Page 139: ......
Page 142: ...www zumtobel com ciria LUXMATE CIRIA Instructions for start up and use ...