Step 1:
Choose desired location for camera housing installation. Verify mounting structure and
surface is capable of supporting the camera. Select a flat, clean, and indoor surface, paste
the bracket mount on where you want to install the camera with a double-sided adhesive.
Step 2:
Leave the fasten bracket for at least 24 hours before you connect the camera with the
bracket.
Step 3:
Adjust the viewing angle of the camera.
*Tips
: For your safety, please fasten your camera on a flat, clean, and indoor surface. If the
location is undesirable (outdoor, rough, wooden, cement or ceramic tile surfaces), please
follow the instruction below.
6. Camera Installation
：
Magnetic Ball Holder
Step 1:
Fix the bracket to where you want to install the camera with the supplied screw.
Step 2:
Connect the camera with the Joint Lock connected to the bracket, and secure the Joint
Lock to fix.
Step 3:
Adjust the viewing angle of the camera.
*Tips
: Secure the Joint Lock tightly to avoid the camera dropping down.
Elevate your camera. Mount your ZUMIMALL motion detection camera at least 7 feet(2
meters) above the floor and aim it slightly downward for the best sensor performance.
Outdoor Metal Mount
6
