![ZUMEX ESSENTIAL PRO User Manual Download Page 17](http://html1.mh-extra.com/html/zumex/essential-pro/essential-pro_user-manual_942332017.webp)
31
EN
Accessories
There is a wide range of accessories available for you to make the most of your
machine:
1Step Extraction Kit
With this accessory you will be able to dismantle the machine in just 10
seconds and clean it under the tap or in the dishwasher.
* Including juice extraction system.
Kit S / 1Step Extraction Kit S
To juice fruit that has a diameter of 45 mm to 67 mm.
Countertop Kit
Integrates waste management keeping things practical and clean.
Elevation kit
This Zumex machine has an Elevation Kit to make it easier to clean the
surface where it is located.
Bottle set
For self-service restaurants - bottles, glasses or jugs of juice can be
distributed easily. Includes three trays (4 heights). It is integral to the
podium and the whole set can be transported with ease.
Zumex Pack
Fresh drinks can be packaged for commercialization, especially freshly
squeezed orange juice. There are 6 formats (1.5 l, 1 l, 75 cl, 50 cl, 33cl and 25
cl) and custom-made stickers.
Check
www.zumex.com
for more information on accessories for your
machine.
Detecting Faults
Fault
Possible cause
Correction
The machine doesn’t work
Machine not plugged in.
Plug it in.
No power is reaching the plug.
Check the socket.
Cover not fitted properly.
Make sure it has been fit
properly.
Juice container not fitted
properly.
Make sure it has been fit
properly.
Blocked pressing units.
Turn off the machine at the
mains and unblock the pressing
units.
Safety sensors malfunctioning.
Contact your technical service.
Faulty ON/OFF button.
Contact your technical service.
Faulty circuit.
Contact your technical service.
The machine blocks
frequently during juicing
Insufficient voltage.
Check that the voltage matches
that indicated in the manual.
Faulty circuit.
Contact your technical service.
The pressing units are not
synchronized
Fault in an axle.
Contact your technical service.
Peel ejector breaks
Peel ejector incorrectly fitted.
Place it in its correct position
inserting it totally until
observing it has madecontact
(Fig. 8)
You can hear the motor
running but the pressing
units are not turning
Internal fault.
Contact your technical service.
Summary of Contents for ESSENTIAL PRO
Page 3: ...3 ES Drawing Figuras Figures Abbildung Figure...
Page 70: ......