Zultys ZIP2, User Manual

Page: 72 / 98

64
ZIP2 User’s Manual
B.4.2 Network Configuration Parameters
Network Configuration parameters define settings required by the phone to communicate with
the network. Figure B-4 lists the Network Configuration parameters.
Parameter Description
Equivalent
web interface
parameter
Version
Introduced
IF0DHCP When set to’ DHCP’, phone uses DHCP to
configure network settings: IP address, subnet
mask, domain name, default gateway, DNS
servers, NTP server address, and TFTP server
address. Valid settings are ‘DHCP’ and
‘FIXED’:
‘DHCP’ - enables DHCP
‘FIXED’ - disables DHCP and enables Fixed IP
Addressing
Default value is ‘DHCP’.
section 5.3.2 on
page 23
3.35
IF0DNSDOMAINNAME Parameter is name of the domain in which the
phone resides; used for manual configuration
when IF0DHCP is set to ‘FIXED’ or DHCP
does not return the domain (DHCP option
15). Valid settings are FQDN or IP address in
dotted decimal notation.
Default value is an empty string.
section 5.3.2 on
page 23
3.35
IF0DNSHOSTNAME Parameter is name of the FQDN of the host;
used for manual configuration when
IF0DHCP is set to ‘FIXED’ or DHCP does not
return the host name (DHCP option 12). Valid
setting is an FQDN.
Default value is an empty string.
section 5.3.2 on
page 23
3.35
IF0IPADDRESS Parameter is static address assigned to the
ZIP2. Used for manual configuration when
IF0DHCP is set to ‘FIXED’ or DHCP does not
return an address (DHCP option 50). Valid
setting is an IP address in dotted decimal
notation.
Default value is an empty string.
section 5.3.2 on
page 23
3.35
IF0IPDNS Parameter is IP address of primary DNS
Server. Used for manual configuration when
IF0DHCP is set to ‘FIXED’ or DHCP does not
return DNS Server (DHCP option 6). Valid
setting is an IP address in dotted decimal
notation.
Default value is an empty string.
section 5.3.2 on
page 23
3.35
Figure B-4 Network Configuration Parameters