Zte ZXR10 5250 Series Command Reference Manual Download Page 535

Page: 535 / 708

Chapter 4 Service Configuration

zte(cfg)#show pppoe-plus port 2

PPPoE VST remote ID on port 2: port2

4.28.7 set pppoe-plus mode port

Purpose

This command sets the mode of handling dynamic user information on a port.

Command Mode

Global configuration mode

Syntax

set pppoe-plus mode port

1-52

default

drop

modify

}

Parameter Description

Parameter

Description

1-52

Port number. Different devices have different port number ranges.

In the syntax, the 5250-52TC device is used as an example.

default

Default mode, in which the pppoe+tag information in packets will

not be modified.

drop

Drop mode, in which the packets carrying the pppoe+tag

information will be discarded.

modify

Modify mode, in which the pppoe+tag information in packets will

be replaced by the local pppoe+tag information.

Guidelines

When a PPPoE packet carrying the pppoe+tag information is received, the port directly

forwards the packet to the server if the mode is

default

, or discards the packet if the mode

drop

, or replaces the pppoe+tag with the local pppoe+tag and then forwards the packet

to the server if the mode is

modify

4.29 ZESR Configuration

4.29.1 set zesr ctrl-vlan protect-instance

Purpose

This command binds a control VLAN to a STP instance.

4-477

SJ-20131111172707-003|2013-11-27 (R1.0)

ZTE Proprietary and Confidential

Summary of Contents for ZXR10 5250 Series





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZXR10 5250 Series

Reviews:

Related manuals for ZXR10 5250 Series

Brands by name

Popular brands

Zte ZXR10 5250 Series, Command Reference Manual

Search results

Summary of Contents for ZXR10 5250 Series

Reviews:

Related manuals for ZXR10 5250 Series

Brands by name

Popular brands