ZXR10 5250 Series Command Reference
4.2.2 set port work-mode
Purpose
This command controls combo ports to switch between the optical mode and the electrical
mode.
Command Mode
Global configuration mode
Syntax
set port
<
portlist
>
work-mode
{
fiber
|
copper
|
auto
[
prefer
{
first-up
|
fiber
|
copper
}]}
Parameter Description
Parameter
Description
<
portlist
>
Port list.
fiber
1000BASE-X optical mode.
copper
1000BASE-T electrical mode.
auto
Automatic switching between the optical mode and the electrical
mode.
first-up
Ports are up in order, which means that the port that establishes
the connection first is up first.
fiber
Optical ports are up first.
copper
Electrical ports are up first.
Guidelines
After optoelectronic switching, the configuration of some special ports (such as the MDIX
port) may be restored to the default. For example, after the MDIX port is configured in
copper
mode, if the mode is switched to the
fiber
mode, the MDIX port will be restored to
the default configuration.
4.2.3 set port speedadvertise
Purpose
This command sets port speedadvertise.
Command Mode
Global configuration mode
4-46
SJ-20131111172707-003|2013-11-27 (R1.0)
ZTE Proprietary and Confidential
