Zte ZXR10 5200 series, User Manual

Page: 99 / 208

Chapter 9 DHCP Configuration
Step Command Function
1
ZXR10(config-ip-pool)#
conflict-time < time > This configures conflict time
in IP pool.
<time> conflict time value,
1~18000 minutes, the default
value is 30 minutes.
2
ZXR10(config-ip-pool)#
no conflict-time This deletes the original
configuration and restores
default time value.
3. To configure reserving address in IP pool or delete the original
configuration, use the following commands.
Step Command Function
1
ZXR10(config-ip-pool)#
exclude < low_ip_addr >[< hig
_ip_addr >]
This configures reserving
address in ip pool.
<low_ip_addr >the begin low
address of reserving address
or a specific address.
<Hig_ip_add r> the highest
address of reserving address
range. This command
parameter must be a subset
of this address pool.
2
ZXR10(config-ip-pool)#
no exclude < low_ip_addr >[< h
ig_ip_addr >]
This deletes the original
configuration.
<low_ip_addr >the begin low
address of reserving address
or a specific address.
<Hig_ip_add r> the highest
address of reserving address
range. This command
parameter must be a subset
of this address pool.
4. To add all suitable ip addresses to ip pool or delete the corre-
sponding IP address range, use the following commands.
Step Command Function
1
ZXR10(config-ip-pool)#
network < net_number >< net
_mask >
This adds all suitable IP
addresses to IP pool.
<net_numberr > a specific
subnet network number,
<net_maskr > subnet mask.
2
ZXR10(config-ip-pool)#
no network < net_number >< n
et_mask >
This deletes corresponding IP
address range configuration.
<net_numberr > a specific
subnet network number,
<net_maskr > subnet mask.
5. To configure IP pool range or delete corresponding IP address
range , use the following commands.
Confidential and Proprietary Information of ZTE CORPORATION 85