Zte zxmsg 5200 Technical Manual Download | Manualshive

Page: 9 / 81

background image

Confidential and Proprietary Information of ZTE CORPORATION

ix

About this Technical Manual

The

ZXMSG

5200

Multiplex

Service

Gateway

is

designed

for

interconnecting  analog  subscribers  and  SOFTSWITCH  packet  networks.
The ZXMSG 5200 follows standard SOFTSWITCH adaptation layer protocol
and  transmission  layer  protocol,  capable  of  implementing  data
communications  between  networks  efficiently.  The  ZXMSG  5200  also  can
implement DSL subscribers access.

The ZXMSG 5200 Multiplex Service Gateway is one of the major NGN-
oriented products that are recently released by ZTE.

Documents that ship with the ZXMSG 5200 include five manuals that
describe basic principles as well as installation, operation and maintenance
methods and procedures in detail. These documents are:

ZXMSG 5200 (V2.0) Multiplex Service Gateway Technical Manual

ZXMSG 5200 (V2.0) Multiplex Service Gateway Installation Manual

ZXMSG 5200 (V2.0) Multiplex Service Gateway Operation Manual

ZXMSG 5200 (V2.0) Multiplex Service Gateway Maintenance Manual

ZXMSG 5200 (V2.0) Multiplex Service Gateway NMS Manual

Purpose of this Technical Manual

This  technical  manual  focuses  on  system  composition,  performance,
technical  indices,  software/hardware,  service  functions  and  networking
configurations of the ZXMSG 5200 Multiplex Service Gateway. This manual
can  help  readers  fully  understanding  the  ZXMSG  5200  system.  This
manual is arranged as follows:

Chapter 1, “Overview”, describes NGN products’ functions, features and
development.

Chapter 2, “System Architecture”, depicts system architecture and
features.

Chapter 3, “Technical Specifications”, describes relevant technical indices.

Chapter 4, “Hardware Structure”, describes hardware structure.

Chapter 5, “Software Structure”, describes software structure.

«
...
7
8
9
10
11
...
»

Summary of Contents for zxmsg 5200


















































































Reviews:

No comments

Related manuals for zxmsg 5200

Brand: Xavax Pages: 42

WAGO 750-8212/000-100

Brand: Viessmann Pages: 36

Brand: Pace Pages: 36

Brand: M-system Pages: 7

Brand: Dusun Pages: 8

Brand: King Pigeon Pages: 58

Flamco Flamconnect GW-10

Brand: Aalberts Pages: 2

Brand: MAXINCOM Pages: 55

POWER LEADER GEH-6505A

Brand: GE Pages: 24

Brand: GE Pages: 16

PACSystems RX3i Genius

Brand: GE Pages: 79

ATEUS EasyGate 501309E

Brand: 2N Telekomunikace Pages: 2

SpeedStream 5450

Brand: Siemens Pages: 83

SpeedStream 6500 Series

Brand: Siemens Pages: 98

Brand: Toshiba Pages: 99

BACnet Protocol

Brand: Bacharach Pages: 12

Brand: Tadiran Telecom Pages: 89

Brand: t.a.c. Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands