Zte ZXHN H3600 Maintenance Management Manual Download

Page: 60 / 100

ZXHN H3600 Maintenance Management Guide

3. Click

Apply

button to apply the changes.

6.3 Configure the LAN

6.3.1 Configure the LAN(IPv4)

The section describes how to configure LAN(IPv4).
The relevant information of Internet status includes

Allocated Address(DHCP)

DHCP

Server

DHCP Binding

and

Port Control

Steps

Check the Allocated Address(DHCP)

1. On the main page of the ZXHN H3600, select

Local Network > LAN > IPv4

to the

IPv4

page.

2. Click

Allocated Address(DHCP)

to the configuration, see

Figure 6-7

Figure 6-7 Allocated Address(DHCP) Page

3. Click

Refresh

to refresh the informations.

Configure the DHCP Server

1. Click

DHCP Server

to the configuration, see

Figure 6-8

SJ-20201203151144-003 | 2021-06-16(R1.0)

Summary of Contents for ZXHN H3600





































































































Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands

Zte ZXHN H3600, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands