Zte ZXHN H3600 Maintenance Management Manual Download

Page: 61 / 100

6 Configure the Local Network

Figure 6-8 DHCP Server(IPv4) Page

2. Configure the DHCP server parameters.

Table 6-6

lists the DHCP server parameters.

Table 6-6 Parameter Descriptions for the DHCP Server

Parameter

Description

DHCP Server

Select

to let the device work as a DHCP server and as-

sign IP addresses to open the client PCs or wireless de-
vices.

LAN IP Address

The IPv4 address of LAN.

Subnet Mask

Subnet mask of the device.

DHCP Start IP Address

The start IP address of the DHCP address pool.

DHCP End IP Address

The end IP address of the DHCP address pool.

ISP DNS

Select the

check box to let the Assign IspDNS work.

Primary DNS

IP address of the DNS server, provided by ISP.

Secondary DNS

IP address of the DNS server2, provided by the ISP.

Lease Time Mode

The mode of Lease Time.

Custom Lease Time

The time during which the client PCs use the IP address
assigned by the DHCP server.After the lease time expires,
the private IP address will be available for assigning to oth-
er network devices.

3. Click

Apply

button to apply the changes.

Configure the DHCP binding

SJ-20201203151144-003 | 2021-06-16(R1.0)

Summary of Contents for ZXHN H3600





































































































Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands

Zte ZXHN H3600, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands