Zte ZXHN H3600 Page 47 Maintenance Management Manual Download

Page: 47 / 100

5 Configure the Internet

Figure 5-24 Port Forwarding Configuration Page

2. Configure the Port Forwarding parameters.

Table 5-17

lists the Port Forwarding settings parameters.

Table 5-17 Parameter Descriptions for the Port Forwarding

Parameter

Description

On/Off

Set radiobox

to enable the port forwarding function.

Name

Virtual host name, which cannot be null.

Protocol

Protocol name, including TCP, UDP, TCP AND UDP.
The default protocol is TCP.

WAN Host IP Address

IP address segment of the WAN-side hosts.

LAN Host

IP address of the LAN-side host.

WAN Port

Port segment of the WAN-side hosts.

LAN Host Port

Port number range of the LAN-side host. Range: 1-65535.

3. Click

Apply

button to apply the changes.

5.5 Configure the Parental Controls

The section describes how to configure parental controls.

Steps

1. On the main page of the ZXHN H3600, select

Internet > Parental Controls

to the

Parental Controls

page, see

Figure 5-25

SJ-20201203151144-003 | 2021-06-16(R1.0)

Summary of Contents for ZXHN H3600





































































































Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands

Zte ZXHN H3600, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands