ZXHN H268A Maintenance Management Manual(EXETEL)
Parameter
Description
VLAN ID
Identifies a VLAN. Range: 0 – 4094. To ensure normal service
operation, the
VLAN ID
must be the same as that set in
upper-layer configuration.
– End of Steps –
Related Task
Select
Internet > WAN > DSL > DSL Modulation Parameters
. You can configure the
DSL modulation types and enhance capability.
4.1.3 Configure the Ethernet Connection
Ethernet configuration process refers to
4.1.2 Configure the DSL Connection
4.2 QoS
4.2.1 Configure the QoS Global Parameters
The procedure provides the function of
switch and other global parameters
configuration. Packets that match no classification rules will be processed according to
open the default policy showed in The procedure.
Steps
1.
On the main page of the ZXHN H268A, select
Internet > QoS > QoS Global
Configuration
to open the
QoS Global Configuration
page, as shown in
Figure 4-3 QoS Global Configuration
2.
Select
Off
to enable the QoS function. By default, this function is enabled. Then click
Apply
button to apply the changes.
– End of Steps –
4.2.2 Configure the QoS Classification
The procedure provides the parameters of QoS classification configuration features.
4-8
SJ-20150916162339-007|2017-02-16 (R1.0)
ZTE Proprietary and Confidential
