manualshive.com logo in svg

Zte ZXHN H1600, Maintenance Management Manual, Page: 29 / 109

Share
Download
Zte ZXHN H1600 Maintenance Management Manual Download Page 29

5 Configure the Internet

Parameter

Description

VCI Range: 0 - 65535

Service Type

If xDSL Transfer ModeEnter is selected to be ATM, Service Type
needs to be configured.
ATM QoS used to limit the transmission of uplink traffic.
The options are: UBR, CBR, VBR-nrt, and VBR-rt.

PCR

If Service Type is selected to be CBR,VBR-rt or VBR-nrt, PCR
needs to be configured.

SCR

Sustainable Cell Rate.
If Service Type is selected to be VBR-rt or VBR-nrt, SCR needs
to be configured.

MBS

Maximum Burst Size.
If Service Type is selected to be VBR-rt or VBR-nrt, MBS needs
to be configured.

Type

The connection type includes Routing and Bridge Connection.
In this case, Routing is selected.

Service List

Options: INTERNET, TR069, IPTV.
This parameter must be consistent with service configuration.
For example, if 

INTERNET

 is selected, it indicates that the WAN

connection supports the Internet access service only. If 

TR069

 is

selected, it indicates that the WAN connection supports remote
management.

MTU

Define the maximum transfer unit.
In this case, default value is 1492.

Link Type

There are two link types: PPP and IP.

PPP Transfer Type

In this case, default value is PPPoE.
If xDSL Transfer ModeEnter is selected to be ATM, PPP Trans-
fer Type includes PPPoE and PPPoA.

PPP

Username/Password

PPPoE

 user name and password.

They are provided by the 

ISP

.

IP Version

The IP version includes: IPv4 and IPv6 IPv4/v6
In this case, IPv4 is selected.

IPv4

IP Type

By default, it is set to DHCP. Options:

DHCP: The DHCP server automatically allocates a dynamic
IP address to the device.

SJ-20200218145027-006 | 2021-03-04(R1.0)

5-7

Summary of Contents for ZXHN H1600














































































































Reviews:

No comments