ZXG10 iBSC Hardware Installation Guide
Note:
The left side door and the right side door are installed with the same method.
For multiple cabinets in a single row, only the left side door or the right side door of the
two cabinets at the two ends of the row need be installed.
– End of Steps –
5.5.2 Installing Decorative Plates
Steps
1.
Installing Front and Rear Decorative Plates
Align the holes of front and rear decorative plates with upper beam of the cabinet.
Tighten the screws of decorative plates. Refer to
.
Figure 5-31 Fixing Front/Rear Decorative Plates
1.
Screw
2.
Front decorative plate
3.
Rear decorative plate
In the case of multi-cabinets, install the front and rear decorative plates of cabinets
one by one.
shows installed front and rear decorative plates.
5-24
SJ-20110531095035-004|2011-10-28 (R2.0)
ZTE Proprietary and Confidential
Summary of Contents for ZXG10 iBSC
Page 8: ...II ...
Page 167: ...Figures Figure 11 7 Step 3 of Board Unplugging 11 5 V ...
