Zte ZXBIV IPTV Operation Manual Download Page 98

Page: 98 / 125

ZXBIV IPTV MDP Operation Manual

4. Click

Browse

to select the EXCEL file at local and then click

Upload

to upload the channel task information described in

the EXCEL file.

ND OF STEPS

Executing Channel Task

Steps

1. Click

Channel > Channel Task

2. Click

query

to find the channel task to be executed.

3. Select the channel task and then click

Execute

at the line of

the selected channel task or click the

Execute

button under

the channel task list.

Caution:

The task will be distribute to CDN Manager after clicking

ex-

ecute

. If the link is failed at the moment, later on, click the

Distribute execution command

button to distribute it to the

CDN manager.

ND OF STEPS

Deleting Channel Task

Steps

1. Click

Channel > Channel Task

2. Click

Query

to find the channel task to be deleted.

3. Select the channel task and then click

remove

at the line of

the selected channel task or click the

remove

button under

the channel task list to delete it.

ND OF STEPS

Recording Management

Recording management includes querying, adding, deleting and
editing channel recording tasks.

Confidential and Proprietary Information of ZTE CORPORATION

Summary of Contents for ZXBIV IPTV






























































































































Search results

Summary of Contents for ZXBIV IPTV

Reviews:

Related manuals for ZXBIV IPTV

Brands by name

Popular brands

Zte ZXBIV IPTV, Operation Manual

Search results

Summary of Contents for ZXBIV IPTV

Reviews:

Related manuals for ZXBIV IPTV

Brands by name

Popular brands