ZXA10 F660 User Manual
2.
The connection type can be
PPPoE
,
Static
, or
DHCP
.
a. Configure the
PPPoE
mode.
Select
PPPoE
for
Type
, as shown in
Figure 4-2
.
Figure 4-2 PPPoE Mode Configuration
Table 4-1
lists the parameters for the
PPPoE
mode configuration.
Table 4-1 Parameters for PPPoE Mode Configuration
Parameter
Description
Type
Connection mode
Connection Name
PPPoE connection name, automatically generated
by the system
Enable NAT
Whether to enable the
NAT
function
Service List
Service modes supported by the system:
l
TR069 service mode
Remote maintenance and management mode
l
Internet service mode
Broadband and
IPTV
service mode
l
VoIP
service mode
Voice service mode
VLAN ID
VLAN
ID
Username
User name, used by the device authentication on
interworking
Password
Password, used by the device authentication on
interworking
Authentication Type
Authentication type, the same as the authentication
type for the uppper-layer device
4-2
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Summary of Contents for ZXA10 F660
Page 6: ...IV ...
