Chapter 1 Basic Configuration
ZXAN#write
– End of Steps –
1.2.2 Configuring the Out-of-Band NM
In out-of-band
mode, the non-service channel is used to transmit the management
information so that the management channel and service channel are separated.
Compared with the in-band NM mode, the out-of-band NM mode provides more reliable
equipment management channel. When the ZXA10 C300 is faulty, the network equipment
information can be located in time and monitored in real time.
Prerequisite
You have logged in to the ZXA10 C300 through HyperTerminal and entered administrator
mode.
Configuration Data
lists the configuration data of the out-of-band NM.
Table 1-2 Configuration Data of the Out-of-Band NM
Item
Data
Out-of-band NM IP address
11.1.1.1/24
Next hop IP address
11.1.1.254/24
NM server (SNMP server)
IP address: 10.2.1.1/24
Version: V2C
Community name: public
Alarm level: notifications
UDP port: 162
Steps
1.
Enter global configuration mode.
ZXAN#configure terminal
Enter configuration commands, one per line.
End with CTRL/Z.
ZXAN(config)#
2.
Configure the out-of-band NM IP address.
ZXAN(config)#interface mng1
ZXAN(config-if)#ip address 11.1.1.1 255.255.255.0
ZXAN(config-if)#exit
1-7
SJ-20130520164529-007|2013-06-30 (R1.0)
ZTE Proprietary and Confidential
