ZXUPS S60
ZXUPS S606/S610
6/S610 (V1.1) Installation
(V1.1) Installation Manual
Manual
32
32
Confidential and Proprietary Information o
Confidential and Proprietary Information of ZTE CORPORATION
f ZTE CORPORATION
To connect cables in single UPS mode:
To connect cables in single UPS mode:
1.
1.
Connect grounding cables.
Connect grounding cables.
Two grounding cables need to be connected. Connect one
Two grounding cables need to be connected. Connect one
grounding cable between the
grounding cable between the
PE
PE
terminal for AC input (
terminal for AC input (
AC IN
AC IN
)
)
and the grounding bar of the equipment room; connect the other
and the grounding bar of the equipment room; connect the other
one between the
one between the
PE
PE
terminal for AC output (
terminal for AC output (
AC OUT
AC OUT
) and the
) and the
equipment room grounding busbar.
equipment room grounding busbar.
When laying the grounding cables, try to keep them as short and
When laying the grounding cables, try to keep them as short and
straight as possible.
straight as possible.
2.
2.
Connect AC input cables.
Connect AC input cables.
The power supply of the UPS is a single-phase supply. Protection
The power supply of the UPS is a single-phase supply. Protection
device, such as switch and fuse should be configured for AC
device, such as switch and fuse should be configured for AC
input live cable before it supplies the UPS. As shown in
input live cable before it supplies the UPS. As shown in
Figure 15
Figure 15
,
,
there is the input branch for the UPS inside the distribution
there is the input branch for the UPS inside the distribution
cabinet. Protection switch should not be configured from the
cabinet. Protection switch should not be configured from the
input neutral cable; therefore the input neutral cable should be
input neutral cable; therefore the input neutral cable should be
connected to the UPS directly.
connected to the UPS directly.
Connect the input live cable between the
Connect the input live cable between the
L
L
terminal on
terminal on
AC IN
AC IN
of
of
the UPS and the AC distribution cabinet; connect the input
the UPS and the AC distribution cabinet; connect the input
neutral cable between the
neutral cable between the
N
N
terminal on
terminal on
AC IN
AC IN
of the UPS and
of the UPS and
the AC distribution cabinet.
the AC distribution cabinet.
3.
3.
Connect AC output cables.
Connect AC output cables.
The output of the UPS is a single-phase. Connect the output live
The output of the UPS is a single-phase. Connect the output live
cable between the
cable between the
L
L
terminal on
terminal on
AC OUT
AC OUT
of the UPS and the L
of the UPS and the L
terminal of load or the AC output distribution cabinet; connect
terminal of load or the AC output distribution cabinet; connect
the output neutral cable between the
the output neutral cable between the
N
N
terminal on
terminal on
AC OUT
AC OUT
of
of
the UPS and the N terminal of load or the AC output distribution
the UPS and the N terminal of load or the AC output distribution
cabinet.
cabinet.
4.
4.
Connect battery cables.
Connect battery cables.
There are two battery cables: positive cable and negative cable.
There are two battery cables: positive cable and negative cable.
Connect the positive cable between the outer battery cabinet
Connect the positive cable between the outer battery cabinet
and the “
and the “
+
+
” terminal on
” terminal on
BATTERY INPUT
BATTERY INPUT
of the UPS; connect
of the UPS; connect
the negative cable between the outer battery cabinet and the “–”
the negative cable between the outer battery cabinet and the “–”
terminal on
terminal on
BATTERY INPUT
BATTERY INPUT
of the UPS.
of the UPS.
