Zte RSU82, User Manual

Page: 25 / 42

Chapter 4
Hardware Installation
Table of Contents
Overview ....................................................................................................................4-1
Installing an RSU82....................................................................................................4-1
Cables Installation ......................................................................................................4-2
4.1 Overview
The RSU82 can be installed in such ZTE SDR-series base stations as BS8800, BS8900A,
and BS8906E.
4.2 Installing an RSU82
This procedure describes how to vertically install an RSU82 in the RF support cabinet.
Prerequisite
l
The RF support cabinet is installed successfully.
Steps
1.
Caution!
l The weight of the RSU82 is 15 Kg. Therefore, during installation, you should hold
its bottom firmly to prevent it from falling.
l The handle of the RSU82 is used for installation/uninstallation in the cabinet rather
than transportation.
Wear an ESD wrist strap to hold the handle of the RSU82 with one hand, and hold
the bottom of the RSU82 with the other hand to slowly push the RSU82 into the
corresponding slot in the cabinet, as illustrated in Figure 4-1 .
4-1
SJ-20111021104623-005|2012-12-20 (R1.5) ZTE Proprietary and Confidential