Zte O2, Manual To Getting Started

Page: 18 / 22

31 32
FAQs & help
What the symbols on your display mean
Strength of your connection.
What network you’re connected to – either 2G or 3G.
Your Pocket Hotspot will connect to the internet automatically.
You’ll need to manually connect to the internet.
You’re using a roaming network – for when you’re
connecting abroad.
You have a new message.
Whether your wifi is on or off, and how many gadgets
you have connected (in this case 1).
How much battery you have left.
Putting in a microSD Card
1. Pull the microSD cover out of the card slot gently.
2. Put the microSD card into the slot. You’ll hear a click when it
locks in place.
3. Close the microSD cover.
You can use a microSD card with your Pocket Hotspot to share
files between connected gadgets over wifi, or for USB storage.
8. If your Mac asks you for your admin name and password,
type it in (this is usually the username and password you
used when setting up your Mac for the first time).
Click
Install Software .
9. The software will start to install. You’ll get a message when
it’s done. You may get a popup telling you a new network
interface has been detected, if so click
Cancel .
10. Click Close to finish.
11. The Mobile Wifi start page will appear. From here, you’ll be
able to check your data, top up and continue to the internet.