Zte NCN 2001-EPI/CE, User Manual

Page: 57 / 105

NCN 2XXX-EP(B)(C) Brick IP Camera User Manual
44
Confidential and Proprietary Information of ZTE NETVIEW
Select a proper preset, click to turn the camera to the
preset position.
4. Select a preset, click to delete it.
F
I G U R E
4 8 S
E L E C T
P
R E S E T
P
O S I T I O N
Encoding Parameter Settings
This is to set the encoding parameters of each video channel
according to the network condition, to get the best video effect.
Perform the following steps:
1. Click Config > Channel Parameter > Encode
Parameter to go to Encode Parameter Setting window,
as shown in Figure 49.
2. Click Read to display the current parameters.
3. Select video channel and set the stream information of this
channel.
4. Click Save to save the settings.