Zte N861, User Manual

Page: 47 / 176

47
Add WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points which supply WPS.
You can use the following method to connect your phone to a
wireless network using WPS.
1. Touch
the Home Key > Menu Key > System settings >
Wi-Fi .
2. Slide the Wi-Fi switch to the ON position.
3. Touch WPS button connection .
4. Press the WPS button on the wireless router and the
access point will recognize your phone and add it to the
network.
NOTE: After you touch WPS button connection , your phone
gives you two minutes to press the WPS button on the wireless
router.
Adjust Advanced Wi-Fi Settings
1. Touch the Home Key > Menu Key > System settings >
Wi-Fi .
2. Slide the Wi-Fi switch to the ON position.
3. Touch the Menu Key > Advanced to adjust the following
settings.
f
Network notification: Get notifications in the status bar
when Wi-Fi is on and an open network is available.
f
Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi
on in sleep mode.