Zte N861, User Manual

Page: 164 / 176

164
10 mm. Although the SAR is determined at the highest certified
power level, the actual SAR level of the device while operating
can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower the
power output.
The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg, and 1.6 W/kg by
Industry Canada.
This device is compliance with SAR for general population/
uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and
Canada RSS 102, and had been tested in accordance with the
measurement methods and procedures specified in OET Bulletin
65 Supplement C, and Canada RSS 102. This device has been
tested, and meets the FCC, IC RF exposure guidelines when
tested with the device directly contacted to the body.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of
www.fcc.gov/oet/ea/fccid after searching
on FCC ID: Q78-ZTEN861C.
For this device, the highest reported SAR value for usage against
the head is
0.94 W/kg , for usage near the body is 1.31 W/kg .