Zte MF96U, User Manual

Page: 24 / 25

ZTE MF96U User Manual
22 Confidential and Proprietary Information of ZTE CORPORATION
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Disposal of Your Old Appliance

When this crossed-out wheeled bin symbol is attached to a product, it
means the product is covered by the European Directive 2002/96/EC.

All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.

The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
For this product’s recycling information based on WEEE directive, please send an e-mail to
weee@zte.com.cn
Troubleshooting
Problem Suggested Solution
Cannot establish the Wi-Fi
connection between your device
and client.

Refresh network list and select the correct SSID.

Check the IP address to make sure your client can obtain an IP address automatically
in the Internet protocol (TCP/IP) properties.

Type the correct network key (Wi-Fi password) when you connect to the device.
The client connected to the device
cannot access the Internet.

Make sure your SIM card is available.

Change the location to find a place with good signal.

Contact your service provider.
Cannot visit the webGUI
configuration page.

Enter the correct address. The default address is http://192.168.0.1 or
http://mobile.hotspot . .

Only use one network adapter in your PC.

Do not use any proxy server.
About the password

For the Wi-Fi connection password, please check the label on the device.

Select Device Info on the LCD screen to check the SSID and Wi-Fi connection
password.

The default password of the webGUI configuration page is admin .

If you changed the password and forgot the new password, you need to restore the
device to the factory default settings.
For more assistance, please: