Infrared/daylight Operation Modes and Non-white List User Validation Function
34
6
Infrared/daylight Operation Modes and Non-white List User Validation Function
The Mobile Cam has two operation modes – daylight mode and infrared mode. In the infrared
mode, it turns on infrared spotlight. If the switch of infrared mode is on (please refer to Section
4.2) and the light is weak (less than 20 LUX), the Mobile Cam will shut down daylight mode and
start infrared mode automatically. Vice versa, when light is bright (more than 20 LUX), the
Mobile Cam will switch from infrared mode to daylight mode. If the switch of infrared mode is off,
the Mobile Cam will always run in the daylight mode.
Special video call processing modes under the non-white list user validation function:
If there is an incoming call whose number isn’t displayed (The caller may be roaming or the
caller switched off the function of indicating calling number), or whose number exceeds 20
digits, or the white list is full and the number isn’t in the white list, the Mobile Cam will validate
the user as follow:
1) When the switch of the validation of non-white list user is set as “on”, the Mobile Cam will
prompt user to input calling number. If the number is already in the white list, the user will
be further prompted to input the PIN. After entering the correct PIN code, the video call
will be connected. If the number is not in the white list or 3 consecutive incorrect PIN
codes have been entered, the call will be terminated.
2) When the switch of the validation of non-white list user is set as “off”. the Mobile Cam
won’t allow the video call.
Note:
please see Section 2.4 for normal white list operation.
Summary of Contents for MF68
Page 1: ...ZTE MF68 User Manual ...
