Zte MF613, User Manual

Page: 25 / 38

MF613 3G Wireless Router User Manual
Confidential and Proprietary Information of ZTE CORPORATION 25
•
WDS Mode : Lazy Mode, Bridge Mode and Repeater Mode are available. The default value is Disable.
•
Phy Mode : Physical layer transmission mode. CCK, OFDM, HTMIX and GREENFIELD are available.
•
EncrypType : The encryption type including NONE, WEP, TKIP or AES. If you select NONE , any data
will be transmitted without encryption and any station can access the router.
•
AP MAC Address : For WDS Mode of Bridge Mode and Repeater Mode, you have to fill in the other
AP MAC address.
The HT physical Mode parameters are shown in the following figure:
•
Operating Mode : Set the HT physical operating mode.
•
Channel Bandwidth : Set the HT physical channel bandwidth.
•
Guard Interval : Set the HT physical guard interval.
•
MCS : Set fix MCS rate for HT rate.
•
Reverse Direction Grant(RDG) :Enable RDG or not.
•
Extension Channel : Set extension channel. The extension channel is also able to send and receive data.
•
Aggregation MSDU(A-MSDU) : Mark to enable Hyper Throughput TX Aggregate MAC Service Data
Unit, and clear by selecting Disable .
•
Auto Block ACK : Block ACK(Acknowledge Number) or not during data transferring.
•
Decline BA Request : Reject peer BA-Request or not.
Click Apply to confirm your configuration.
Advanced