15
Profile Name
: The name of the profile.
•
APN
: Access Point Name.
•
PDP Type
: Packet Data Protocol (PDP) Type IP is recommended unless service provider instructs
others.
•
PDP Setting
: PDP address mode. If a fixed IP address is given by your service provider, select
Manual
PDP
. Otherwise select the
Auto PDP
and the router will automatically obtain this parameter.
•
DNS
: If a fixed IP address is given by your service provider, then choose
Manual DNS
. Otherwise,
choose
Auto DNS
, and device will automatically obtain parameters.
•
Authentication
: Password Authentication Protocol (PAP) provides a simple method without encryption
for the peer to establish its identity using a 2-way handshake. Challenge-Handshake Authentication
Protocol (CHAP) is used to periodically verify the identity of the peer using a 3-way handshake.
•
User Name
: User name is used to obtain authentication from the ISP when the connection is established
•
Password
: Password is used to obtain authentication from the ISP when the connection is established.
Click
Set default
to set this profile as the default profile.
Settings
Note
:
•
Do not modify any settings unless instructed by your service provider.
•
Please disconnect the device from the network before change the settings.
Network Select
This is only available in LTE gateway mode. Select
Settings > Network Select
, the Band Selection Mode
is shown in the following figure:
•
Automatic
: Device searches for available network.
•
LTE Only
: Device searches for LTE network only.
•
3G Only
: Device searches for WCDMA network only.
Click
Apply & Reboot
to confirm your configuration.
