7
Answering a Call
When the phone rings, pick up the handset to answer it. If the telephone has hands-free function
you also can answer the call by pressing the
Hands-free
button. Press the
Hands-free
button
again to end the call.
WPS Function
Your device supports WPS function. You can use this function to connect the client to your
device.
1.
Power on your device, and start the WPS function.
2.
Press the WPS button on your device to activate the WPS function.
3.
Enable the WPS function on your client to respond to this authentication process.
4.
Follow the system prompts on your client to finish the connection.
Wireless Connection
If you want to use Wi-Fi to connect to your device, please refer to the following steps.
1.
Make sure that the Wi-Fi works normal. Please check the Wi-Fi Setting on the 4G CPE page or check
the Wi-Fi indicator.
2.
Use your normal Wi-Fi application on the client to search for the available wireless network.
NOTE:
Please set the client to obtain an IP address automatically, and the client will get an IP address like
“192.168.0.101”. For details, refer to Configuring Your PC.
3.
Select the SSID (Wi-Fi name) of your device, and then click
Connect
.
4.
Enter the password and then click
OK
.
