background image

10 

 

 

 

Do not place objects on top of the router. This may lead to overheating of the device. 

 

The device must be placed in ventilation environment for use. 

 

Do not expose the router to direct sunlight or store it in hot areas. High temperature can shorten the life 

of electronic devices. 

 

Do not allow children to play with the router or charger. 

 

Keep the length of the cable between the router and the phone less than 10 meters. 

 

The router is for indoor use only. Do not use the router outside. Do not connect telephone extensions 

which run outside of the building. These can result in lightning damage to your unit. 

 

For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily 

accessible. 

Cleaning and Maintaining 

 

Use an antistatic cloth to clean the router. Do not use chemical or abrasive cleanser as these could 

damage the plastic case. Turn off your router before you clean it. 

 

Use the router within the temperature range of -10

 

 +55

, and the storage temperature range is 

-40

 

+70

. The humidity range is 5%~95%.   

 

Do not use your router during a thunderstorm. Remove the mains power pack from the wall socket. 

 

Do not take out your (U)SIM card unnecessarily. The (U)SIM card may be easily lost or it can be 

damaged by static electricity. 

Limited Warranty 

 

This warranty does not apply to defects or errors in the Product caused by: 

i. Reasonable abrasion. 

ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. 

iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, 

servicing or operation of the Product. 

iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. 

v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTE’s 

reasonable control. 

vi. Usage of third-party products, or usage in conjunction with third-party products provided that such 

defects are due to the combined usage. 

vii. Any other cause beyond the range of normal usage intended for the Product. 

End User shall have no right to reject or return the Product, or receive a refund for the Product from 
ZTE under the above-mentioned situations. 

 

 

This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, 

and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the 

Summary of Contents for MF283U












Reviews: