7
For Bridge
You need to connect the WAN to the LAN port via Ethernet cable and set the clients to
obtain the IP address automatically. Your clients can obtain the IP address from the WAN
DHCP host and connect to the Internet directly.
NOTE
:
If you want to change the operation mode, you need to set the client a fixed IP address between
192.168.0.100 and 192.168.0.200, and then log in the 4G CPE page to change it.
For Cable Broadband
You need to connect the WAN to the LAN port via Ethernet cable and select the WAN
Connection Mode. There are three WAN Connection Modes:
PPPoE
,
Static
and
DHCP
.
Please contact with your service provider to confirm which mode is fit for you.
Select
Settings
>
Network Settings
to change the WAN connection mode and set the detail
parameters.
PPPoE mode
Select
PPPoE
, input the User Name and Password and then set the WAN Connection
Mode.
NOTE
：
Your service provider gives you the User Name and Password.
Static mode
Select
Static
, input all the parameters and then click
Apply
.
