manualshive.com logo in svg

Zte ME3000_V2, At Command Manual

Share
Download
Zte ME3000_V2 At Command Manual Download Page 79

 

                                                                           GSM Module 

——Set the message’s input mode as text mode. 

at+cmgs="13360504647"

<CR>

 

hallo

<ctrl/Z>

 

+CMGS: 1 
OK 
——Send one message. "13360504647" is the number of message recipient, and hallo is the 
message text.     
 

at+cmgw="13360504647"

<CR>

 

goodbye

<ctrl/Z>

 

+CMGW: 1 
OK 
——write a message in "SM"."13360504647" is the number of message recipient, and goodbye 
is the message text. From the returned forCMGW, we could see that the message is 
saved to the index 1.     
 

at+cpms? 

+CPMS: "SM",1,50,"SM",1,50,"SM",1,50 
OK 
——Check the current memory. From +CPMS, we know there is a message in “SM”, which is 
the newly composed message.   
 

at+cmgr=1 

+CMGR: "STO UNSENT","13360504647", 
goodbye 
 
OK 
——Read this message with the index No. From the returned inforCMGR, we know 
that the message is not sent.

（

" STO UNSENT "

）

. 

 

at+cmss=1 

+CMSS: 1 
 
OK 
——Send the saved message.     
 

at+cmgr=1 

+CMGR: "STO SENT","13360504647", 
goodbye 
 
OK 
——Read this message with the index No. From the returned inforCMGR, we know 
that the message has been sent.

（

" STO SENT "

）

 

 

                                                                                                       

78

Summary of Contents for ME3000_V2



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands