24
Cable WAN Settings
When the Smart Hub is connected to the public network through a WAN
port in
Auto
or
Cable broadband mode
(see
Connecting to the Public
Network (WAN)
), you need to set the parameters given by your service
provider.
1. Go to the 5G CPE home page and select
Set internet
.
2. Click the Connection mode box to select
PPPoE
,
Static IP
, or
Dynamic
IP
and set the relevant parameters.
PPPoE:
For this connection mode, you need to enter the username
and password given by the service provider. Select
Auto
or
Manual
for dial-up, depending on whether you want the Smart Hub to
connect to the network automatically every time it restarts.
Static IP:
For this connection mode, enter the IP address, subnet
mask, default gateway, primary DNS, and secondary DNS given by
your service provider.
Dynamic IP:
Obtain dynamic IP address to access the Internet.
3. Click
Connect
or
Apply
.
Wi-Fi Settings
Click
Set Wi-Fi
on the 5G CPE home page to configure Wi-Fi settings.
Click the
Enable
/
Disable
to the right of
Wi-Fi
and click
Apply
to turn on or
off Wi-Fi for your Smart Hub.
When Wi-Fi is enabled, click
Main SSID
,
Guest SSID
,
WPS
,
Advanced
settings
, and
Internet Wi-Fi
to set each group of functions.
