Zte J G380 User Manual Download Page 64

Page: 64 / 65

ZTE-J G380 GoTa Digital Trunking Phone User Manual

Problem Possible

Cause

Solution

The battery or charger is
damaged.

Contact your local dealer.

The temperature is lower than 0
°C or higher than 45 °C.

Avoid charging battery at too low or
high temperature.

Charging failure

The battery is not connected well
with charger.

Connect again, and make sure the
cables are connected correctly.

Standby time depends on the
setting by network service
provider, and varies from provider
to provider.

Power off the mobile phone.

Battery power is run out.

Replace the battery.

Short standby
time

Network connection failure

Move to the area with network, or
power off the mobile phone.

Powering on
failure

The battery power is run out.

Charge the battery.

UIM card is failed or damaged.

Return the UIM card to network
service provider to test.

UIM card is not inserted correctly. Insert the UIM card correctly.

UIM card failure

The metal contacts of UIM card
are dirty.

Clean the metal contacts with soft and
dry cloth.

Summary of Contents for J G380


































































Search results

Summary of Contents for J G380

Reviews:

Brands by name

Popular brands

Zte J G380, User Manual

Search results

Summary of Contents for J G380

Reviews:

Brands by name

Popular brands