manualshive.com logo in svg

Zte J G380, User Manual

Share
Download
Zte J G380 User Manual Download Page 13

ZTE-J G380 GoTa Digital Trunking Phone User Manual 

13 

•

 

Warning:

 If the battery is damaged, do not discharge it. If the leakage does come into contact with 

the eyes or skin, wash thoroughly in clean water and consult a doctor. 

Limitation of Liability 

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential 
damages resulting from or arising out of or in connection with using this product, whether or not ZTE 
had been advised, knew or should have known the possibility of such damages. The user should refer 
to the enclosed warranty card for full warranty and service information. 

Note:

 The pictures and icons shown in the manual are just schematic drawings for function 

demonstration. If they are inconsistent with your handset, please take your handset as the 
standard. If the inconsistency exits in the manual because of the handset function updating, 
please refer to the follow-up public information from ZTE CORPORATION. 

Summary of Contents for J G380


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands