Zte IX256, User Manual

Page: 47 / 74

47
• Default Policy : Set how to handle the packet if none of the rules matches.
• MAC address : Set the MAC address that will be filtered.
• Dest IP Address : Set the destination IP address that will be filtered.
• Source IP Address : Set the source IP address that will be filtered.
• Protocol : Set which protocol will be used for filtering.
• Dest Port Range : Set the destination port numbers that will be filtered
• Source Port Range : Set the source port numbers that will be filtered.
• Action : Set how to handle the packet if it matches with the rule.
• Comment : Type comment for the filter settings.
Note :Filtering rules are matched one by one, if met this provision, it will not continue to match
the rules listed below.
Click < Apply > to confirm your configuration. Click < Delete > to delete the rule which you
selected. Click < Reset > to clear what you select or input.
To add a new rule:
a) Select Enable and click < Apply > in the Basic Settings area.
b) Input the detail information in the Mac/Ip/Port Filtering area.
c) Click < Apply > in the Mac/Ip/Port Filtering area.
Ordinary Operation