Zte H3140 Maintenance Management Manual Download

Page: 87 / 97

7 Configure the Management and Diagnosis

Figure 7-7 Mirror Configuration Page

2. Configure the mirror configuration parameters.

Table 7-2

lists the user mirror configuration parameters.

Table 7-2 Parameter Descriptions for the Mirror Configuration

Parameter

Description

Mirror

Enable or disable the mirror function.

Source

Network-side WAN interface.

Destination

User-side LAN interface.

3. Click

Apply

button to apply the changes.

7.6 Configure the TR069 function

Abstract

The section describes how to configure the TR069. TR069 provides the parameters of
the TR069 configuration features.
The relevant TR-069 includes Basic Configuration and Certificate Management.

Steps

1. On the main page of the H3140, select

Management&Diagnosis > TR-069

to the

TR-069

page.

2. Click

Basic Configuration

to the TR069 basic configuration page, see

Figure 7-8

SJ-20210621164956-009 | 2021-12-07(R1.0)

Summary of Contents for H3140


































































































Search results

Summary of Contents for H3140

Reviews:

Related manuals for H3140

Brands by name

Popular brands

Zte H3140, Maintenance Management Manual

Search results

Summary of Contents for H3140

Reviews:

Related manuals for H3140

Brands by name

Popular brands