Input to output isolation
Not isolated
Input voltage
20 to 35 VDC
Output voltage
13.8 VDC ± 0.1 V
Output voltage regulation
< 3%
Input current at no load
Approx. 50 mA
Output current
Continuous
60 A
Current limit *
70 A
*Note: In current limit condition, the output voltage will drop if the current drawn increases beyond the current
limit value of 70 A
Output ripple and noise
less than 50 mV RMS
Efficiency
Approx. 92%
Operating ambient temperature
-20 to +30
o
C
(derate linearly to 0 at 70º C)
Humidity
Max. 95%, non condensing
Protections:
- Overload
By current limiting
- Over heating
Drop in output voltage
- Reverse polarity
Fuse protection, 30 A
- Over voltage
Varistor
(also protects against load dump)
Input side fuse
60 A
(2 pieces of 32V, 30A in parallel)
Safety and EMC Standards:
- Emission
EN50081-1
- Immunity
EN50082-1
- Automotive directive
95/45/EC
Input / output connections
Terminal Block – (M6 Bolt & Nut)
Weight
2.6 lbs / 1.2 Kg
Dimensions (H x W x D)
3.6” x 3.5” x 7.0”(93 x 90 x
177mm)
Warranty
5 years
NOTE: Specifications are subject to change without notice
CAUTION! : THERE IS NO ISOLATION BETWEEN THE INPUT AND THE OUTPUT. INPUT AND
OUTPUT HAVE A COMMON NEGATIVE
