Interface Icons
Icon
Indication
Signal strength
Roaming
New message
Vibration
Silence all
Ring
Alarm
Earphone
Power indicator
Insert and Extract UIM Card
Power off the phone, remove
the battery and other external
power.
Insert UIM card into UIM card
slot in the phone, or remove
UIM card out of slot, as shown
in picture hereinafter.
Remove and Install the Battery
The attached Li-ion battery along with the phone can be used after unpacking. For the first three times, please
use up the power and charge it fully for a new battery to perform well.
Remove
: (1) Press and push the back-cover of the phone down to release and remove it off the phone. (2) Put
finger on the side/top/bottom finger grips, and then lift up the battery from the finger grips to remove the battery.
4
