Zte AT&T Wireless Home Phone Base, User Manual

Page: 15 / 40

9 Getting Started
voicemail. Simply follow the voice prompts to complete setup. To
enable remote voicemail retrieval and for added security be sure to
create a password during setup.
Message Waiting
There are two indicators for a new message waiting: 1) the voicemail
icon; and 2) an intermittent dial tone.
The voicemail icon
on your Wireless Home Phone Base
flashes when a voicemail message is waiting. You will also hear an
intermittent dial tone on any connected phone handset before
placing a call.
Retrieving Messages
To retrieve voice messages, dial
1
on any home phone connected
to the Wireless Home Phone Base and wait four (4) seconds to
connect to your AT&T wireless voicemail box. Simply follow the
voice prompts to listen to and manage your messages. (Alternately,
you may dial your 10-digit home phone number to access your
voicemail box.)
Remote Retrieval
To retrieve voicemail messages from a phone not connected to the
Wireless Home Phone Base, dial the number associated with your
Wireless Home Phone Base service. When voicemail picks up, press
*
. You will then be prompted to enter your password. Simply follow
the prompts to listen to and manage your voicemail messages.
Transferring a Phone Number
Transferring a landline phone number to your Wireless Home
Phone Base can take five (5) days or more. Outgoing calls can
be made immediately using your Wireless Home Phone Base,
however incoming calls will continue through your old service until
the transfer is complete. It is recommended that a phone be kept
connected to your existing home wiring or prior service to continue
to receive incoming calls until the transfer is complete. To check
the status of your transfer, visit
www.att.com/port
.