Zte AR910 User Manual Download Page 37

Page: 37 / 39

Appendix

Declaration of RoHS compliance

We’re determined to reduce the impact we have on the environment and take

responsibility for the earth we live on. So this document allows us to formally declare

that the

AR910

, manufactured by ZTE CORPORATION, fully complies with the

European Parliament’s RoHS (Restriction of Hazardous Substances) Directive

2011/65/EC, with respect to all the following substances:

(1) Lead (Pb)

(2) Mercury (Hg)

(3) Cadmium (Cd)

(4) Hexavalent Chromium (Cr (VI))

(5) Polybrominated biphenyl (PBB)

(6) Polybrominated diphenyl ether (PBDE)

Our compliance is witnessed by written declaration from our suppliers. This confirms

that any potential trace contamination levels of the substances listed above are below

the maximum level set by EU2011/65/EC, or are exempt due to their application.

The AR910 manufactured by ZTE CORPORATION, meets all the requirements of EU

2011/65/EC.

Summary of Contents for AR910








































Search results

Summary of Contents for AR910

Reviews:

Related manuals for AR910

Brands by name

Popular brands

Zte AR910, User Manual

Search results

Summary of Contents for AR910

Reviews:

Related manuals for AR910

Brands by name

Popular brands