ZTC ZT586, User Manual

Page: 89 / 165

89
Settings ”. Press the left soft key “ SELECT ” to
enter the following settings ( GPRS service requires
network support. Before using, please confirm with
your network operator that GPRS service has been
activated for you and that your mobile phone is
located in an area covered by the GPRS network.
At such a time, a “ G ” will appear on the right side of
the network signal strength bar.):
- “ IP Address ”: Enter the IP address of the WAP
gateway you are accessing.
- “ APN ”: Enter the APN (Access Point Name).
- “ User ID ”: The user ID of the APN server.
- “ Password ”: The password needed by the APN
server to recognize your identity.
4.6.4.2
Cache Mode
The cache mode can be set for “ Always Check ”
or “ Never Check ”.
4.6.4.3
Push Security
The security level of the “Push” service mailbox
may be set for “ Accept All ”, “ Trusted Only ” or
“ Accept None ”.