CHARGING THE BATTERY:
Charge the Lithium polymer (Lipo) Battery. Review the warnings in the front of this manual and
most importantly,
NEVER
leave a charger unattended.
1.
Plug the C-420 charger into an outlet. The three
LED’s will indicate green.
2.
Plug the battery into the 4-wire port on the end of
the charger. Do not force! The plug will only go in
one way.
3.
The LED’s will turn red indicating that the battery
is charging. Note: This charger is capable of
charging 2S or 3S batteries. The number of lit
LED’s will correspond to the number of cells being
charged.
4.
Once all three LED’s turn green, the battery is finished charging. Note: It is normal for the charger to
be warm while charging.
5.
Unplug the battery from the charger and the charger from the wall as soon as it is finished.
TRANSMITTER SETUP:
1.
Install (4) 1.5v AA batteries into the
back of the transmitter. Make sure the
polarity matches the (+/-) indicators.
2.
Familiarize yourself with the
transmitter controls.
Throttle Cut: locks the motor from
accidentally turning on.
Auto: Toggle between three flight
modes:
•
0-Manual mode. Minimal stabilization. Use for aerobatics.
•
1-Semi stabilization for faster performance with mild stability control.
•
2-Full stabilization for smoothest flight. Perfect for learning to fly.
HELP! Use when you get disoriented and need the airplane to roll to upright and level flight.
