FIG 1
FIG 2
FIG 2
Page 1
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers offer varied models to each vehicle and occasionally manufacture
more than one body style of the same model. To assure your part is correct; our tech
department can be contacted at [email protected] to verify fitment and assist with
technical questions. All other inquires can be directed to [email protected]. In the
event you do not have internet access please call 844-653-8040
BEFORE YOU BEGIN
START HERE:
Turn off engine, chalk tires with stop block, open the hood
and disconnect the battery.
Layout and organize all the provided parts.
STEP 1
STEP 2
2) Assemble the
provided hardware
as seen in Figure
#2.
Hex Bolt
Lock Washer
Flat Washer
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR MODEL OR PART.
LED LIGHT BRACKET INSTALLATION
SEE FIGURE 2
1) Insert the M6
Extruded “U“ Nuts
on to the ZROADZ
Mounting Bracket as
seen in Figure #1.
Note the orientation.
- (1) Rear Bumper Mounting Bracket
- Air Hose & Nozzle
- Alcohol Cleaning Solution
- Cleaning Rag
- Socket Set & Ratchet Tool
Ratchet Extensions
- Various Wrenches
- Dikes or Snips
- Torq Bit Set
- Heat Gun
Tools Required
LED LIGHTS included
hardware included
Parts included
- No LED Lights Included
- (1) 10” LED Light Bar
- No Power Cable Included
- (1) Power Cable Wiring Harness
Z384931
Z384931-KIT
Z384931
Z384931-KIT
(2) - M6-1.0 x 100mm Hex Bolts
(2) -1/4” Lock Washers
(2) - 1/4” x 1 1/2” Flat Washers
(2) - M6-1.0 Extruded “U“ Nuts
Installation Guide
Parts are PATENT PENDING. All Rights Reserved - Copyright ©2018 - ZROADZ LED, INC.
201
9-2021
JEEP WRANGLER JL
PART#:
Z384931 / Z384931-KIT
REAR BUMPER LED LIGHT MOUNTS
PROFESSIONAL INSTALL RECOMMENDED
