4
ZOTAC nForce 790i-Supreme SLI Motherboard
Press
Enter
to auto-detect IDE and SATA channels in the system. Once the channel
is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and
Sector are automatically filled in.
q
None
There is no HDD installed or set.
q
Auto
The system can auto-detect the hard disk when booting up.
q
Manual
When you set the channel to
[Manual]
and change
Access Mode
to
[CHS]
, you
can then enter the number of cylinders, heads, Precomp, landing zone, and sector.
You can manually enter the values or you can press Enter to display a window that
tells you the min and max values.
The BIOS supports the following HDD
Access Modes:
v
CHS
For HDD less than 528 MB.
v
LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
v
Large
For HDD greater than 528 MB but not supporting LBA.
v
Auto
Recommended mode.
Summary of Contents for nForce 790i-Supreme
