Zotac H87 Series, User Manual

Page: 27 / 50

26
Intel H87-MATX series Motherboard
To set an administrator/User Password:
1. Select the item [Administrator/User Password] and press <Enter>.
2. From the password box, type a password composed of at least six letters and/or
numbers, then press <Enter>.
3. Confirm the password when prompted:
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor/user password, follow the same steps as setting a use
password.
q
GateA20 Active
When set to [Upon Request], GA20 can be disabled using BIOS services. When
set to [Always], GA20 can not be disabled; this option is useful when any RT code
is executed above 1MB.
q
Option ROM Messages
Use this item to set display mode for Option.
q
Interrupt 19 Capture
When set to [Enabled], this function allows the option ROMS to trap interrupt 19.
q
Boot OS Selection
This item allows you to select Boot OS, options: [UEFI OS], [Legacy OS].
q
Full Screen Logo
This item allows you to enable or disable full screen logo.
q
Fast Boot
Enable or disable boot with initialization of a minimal set of devices required to
launch active boot option.