23
Configuring the BIOS
q
Core Multi-Processing
Use this option to enable or disable Core Multi-Processing.
Hard Disk Boot Priority
Press Enter to disply the Hard Disk Boot Priority,then then some of the peripheral equipment
pluged will be displayed.
q
Virus Warning
Allow you to choose the Virus Warning feature for Hard Disk boot sector protection.
q
CPU L1&L2 Cache/CPU L3 Cache
Use these options to disable or enable L1/L2/L3 cache.
q
Quick Power On Self Test
Enabling this option allows the system to skip certain test while booting, which reduces the
time needed to boot the system.
q
First/Second/Third Boot Device
Use this option to set the priority sequence of the devices booted at power on. Use the
Page
Up
and
Page Down
keys to scroll through the options or press
Enter
to display the sub-
menu. Use the
# $
arrow keys to position the selector in the option you choose.
q
Boot Other Device
With the option set to
Enable
, the system boots from some other device if the first/second/
third boot devices fail.
q
Boot Up Floppy Seek
Enabled tests floppy drives to determine whether they have 40 or 80 tracks.
q
Boot Up NumLock Status
This option allows you to select the power-on state of
NumLock
. Select
On
to activate the
keyboard
NumLock
when the system is started. Select
Off
to disable the
NumLock
key.
q
Gate A20 Option
Use this option to choose Gate A20 menu.
q
Typematic Rate Setting
Use this option to set keystrokes repeat. if Enabled, display options as follows:
v
Typematic Rate
v
Typematic delay
q
Security Option
The Security Options allows you to require a password every time the system boots or only
when you enter setup. Select
Setup
to require a password to gain access to the CMOS
Setup screen. Select
System
to require a password to access the CMOS Setup screen
and when the system boots.
q
APIC Mode
Use this function to enable or disable the Advanced Programmable Interrupt Controller
(APIC). If you disable this option, you also disable the MPS Version Control for OS option.
q
MPS Version Control For OS
Use this function to select the Multi-Processor Specification (MPS) version that BIOS passes
to the operating system. Use the
Page Up
and
Page Down
keys to scroll through the
options.
q
Full Screen LOGO Show
This option allows you to enable or disable the display of the full-screen logo when the
system boots. Use the
Page Up
and
Page Down
keys to toggle between
Enable
and
Disable.
Summary of Contents for G43-TX series
