Zotac E350-ITX Series, User Manual

Page: 18 / 46

17
Hardware Installation
Mini PCI Express Slot-Mini_PCIE
There is one Mini PCIe slot, reserved for the WiFi Module.
PCI Express x4 Slot-PCIEX1
There is one PCI Express x4 slot that is designed to accommodate less bandwidth intensive
cards, such as a VGA card.
Jumper Settings
This section explains how to configure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section
whenever in doubt.
CMOS Clear Jumper-JP1
Close Open * = Default setting.
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) or SW1 (Clear CMOS Button) to
clear data.
Notice :
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the
frequency multiplier setting in CMOS setup is changed.
JP1 Selection
1-2* Normal
*
2-3 CMOS Clear
1
1
1
.5
V
1
.5
V
Mini_PCIE
PCIEX1
Expansion Slots
The motherboard contains two expansion slots, one Mini PCIe slot and one PCIe x4 slot.