Zorlu ADB-9010, User Manual

Page: 8 / 22

Installing Plastic Outlet
Install plastic outlet to top of motor cabin via 3,5x9,5 screws
(Figure 4).
3,5 x 9,5 RYSB
Screws
Ø 8 mm
Ø 6 mm
Drilling Mounting Holes
Attach mounting schemeon the wall and drill holes on points
marked as A,B,C via Ø8 mm driller. To install chimney part, use
Ø6 mm driller by taking reference of min./max. height
dimensions .
WARNING : During drilling the hanging holes , please pay attention to the diameter of the
holes to be used for hanging the hood.
If the diameters of hanging holes are not as pointed , the hood can not be assembled properly.
Hood Hanging
Holes
Ø 8 mm
Outlet Connection
Holes
Ø 6 mm
A
B
C
D
E
Nailing Dowels
Nail Ø10 mm dowels into A,B,C holes drilled as Ø8 mm.
Place Ø6 mm dowels on two holes, drilled as Ø6 mm
(Figure 5)
for 60-70-90cm models, drill holes on points marked as
G,H and nail Ø10 mm dowels into it.
10 mm Plastic
dowel
6 mm Plastic
dowel
Figure 4
Figure 5
8